Electronics part storage

Project: Electronics part storage
Status	Needs: Money
Participants	Ceres-c
Last Update	2025-05-26

We're almost done organizing the SMD components we own, but we haven't yet started with the through hole components, mostly due to the fact that we don't know where to put them.

When I was living in the Netherlands I had the pleasure to visit the Den Haag hackerspace and they had an amazing shelving unit with all their components. I really want to replicate that setup, placing it near the electronics table, in between the column and the wall where we enter the Aula Associazioni (TODO: picture)

The final setup at RevSpace

The setup

I essentially want to build a couple (4?) wooden boxes. Each will house 6 Allit Flex 37 storage boxes with removable trays for a total of 24 storage boxes. The inner trays can also be 3d printed (see below), but it's probably easier to just buy them.

Boxes

This section and the following are a direct translation of the RevSpace page

Picture	Model	Trays	Article number	Links
	Flex 37-3	0	457204	https://www.tme.eu/it/en/details/w-457204/containers-and-boxes/allit-ag/457204/
	Flex 37-12	4x red 2x yellow 1x blue 2x green	457200	https://www.tme.eu/it/en/details/w-457200/containers-and-boxes/allit-ag/bma457200/
	Flex 37-15	12x yellow	457201	https://www.tme.eu/it/en/details/w-457201/containers-and-boxes/allit-ag/bma457201/
	Flex 37-17	8x red 4x yellow 2x blue	457202	https://www.tme.eu/it/en/details/w-457202/containers-and-boxes/allit-ag/bma457202/ https://www.leroymerlin.it/prodotti/organizer-porta-minuteria-allit-europlus-flex-37-17-in-polipropilene-l-37-x-h-5-5-x-p-29-5-cm-68716130.html
	Flex 37-27	24 x red	457203	https://www.tme.eu/it/en/details/w-457203/containers-and-boxes/allit-ag/bma457203/

Trays

Picture	Model	Size	Article number	Links
	45/1	54 x 54 x 45	456300	https://www.tme.eu/it/en/details/w-456300/containers-and-boxes/allit-ag/w-456310/ https://www.toolstation.nl/kunststof-inzetbak-45mm-hoog/p44648
	45/2	54 x 108 x 45	456301	https://www.tme.eu/it/en/details/w-456301/containers-and-boxes/allit-ag/w-456301/ https://www.toolstation.nl/kunststof-inzetbak-45mm-hoog/p67434
	45/3	108 x 108 x 45	456302	https://www.tme.eu/it/en/details/w-456302/containers-and-boxes/allit-ag/w-456302/ https://www.toolstation.nl/kunststof-inzetbak-45mm-hoog/p32391
	45/4	108 x 162 x 45	456303	https://www.tme.eu/it/en/details/w-456303/containers-and-boxes/allit-ag/w-456303/ https://www.toolstation.nl/kunststof-inzetbak-45mm-hoog/p17905
	45/5	108 x 216 x 45	456304	https://www.tme.eu/it/en/details/w-456304/containers-and-boxes/allit-ag/w-456304/ https://www.toolstation.nl/kunststof-inzetbak-45mm-hoog/p67840

3D printed

• https://www.thingiverse.com/thing:608590
• https://www.thingiverse.com/thing:3115564
• https://www.thingiverse.com/thing:3061331
• https://www.thingiverse.com/thing:3465615